Aftermarket Taillights
Rear Signaling · DOT CertifiedAftermarket Replacement Part

Rear lamps that make the vehicle read correctly to the traffic behind it.

Taillights are the driver's language to the car following. Sequential strips, brake intensity, and reverse throw all have to match spec — we stock assemblies that do exactly that.

Lighting · Rear Signaling · Ships from Warren, MI

Aftermarket notice: This is a quality aftermarket replacement part — not an OEM component sold by the vehicle manufacturer.

Backed by the Power Auto Parts fit & finish warranty.

Product Overview

The tail-lamp catalog

We stock rear lamps by side, technology (incandescent vs LED), lens tint (smoked, red, clear), and sequential-signal capability where the vehicle uses it. Sub-SKUs branch on inner vs outer position for quarter-panel and lift-gate assemblies.

Applications

Common tail-lamp replacements

Rear-end collision damage

Even minor hits crack lenses and mounting studs.

Failed LED strip

When one section of an LED signature goes dark, the whole assembly is the fix.

Aesthetic upgrades

Owners upgrade to smoked or sequential variants where available.

Signs of Damage

Symptoms of a dying tail lamp

Some things you should never let a customer drive away with:

  • Cracked or missing lens sections
  • Moisture pooling inside the housing
  • LED segments dark or flickering
  • Broken mounting studs allowing the lens to sit proud
Common Replacement Reasons

Why taillights get swapped

  1. 1Rear-end collision damage
  2. 2LED module aging or driver failure
  3. 3Water intrusion through seal failure
  4. 4Trim conversion to smoked or sequential
Materials

Rear lamp materials

Acrylic lens

Injection-molded lens with UV stabilizer.

PC housing

Polycarbonate rear housing for impact and heat resistance.

LED PCB

Driver circuit with individual LED emitters for signature lighting.

Vehicle Compatibility

Fitment matrix

For hatchbacks and lift-gate vehicles, we carry both quarter-panel and lift-gate halves. Send the VIN and we'll confirm the correct side and position pairing.

Buying Guide

Getting the tail lamp right

Step 1

Order both halves for lift-gate cars

Inner and outer lenses meet at the trunk seam. A mismatch reads immediately.

Step 2

Match LED to LED

LED and incandescent produce different color temperatures. Don't mix.

Step 3

Check the socket type

Some cars use dual-filament sockets, others separate. The assembly must match the harness.

FAQ

Taillight questions from the counter

Are smoked lenses street-legal?
The smoked variants we sell meet DOT light-output thresholds. Confirm local rules in your jurisdiction.
Do you sell single-side tail lamps?
Yes. We stock left and right separately and can ship pairs when needed.
How is the seal on your assemblies?
Butyl-tape perimeter seals rated for standard automotive moisture cycling.
Ready When You Are

Signal correctly. Brake brightly. Ship confidently.

Confirm the side, technology, and position with our team and we'll dispatch the correct assembly on the next route.